+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: K7C and a Bailey #3 type 11 (/showthread.php?tid=7375547)
K7C and a Bailey #3 type 11 - tablesawtom - 04-04-2024
All have been freshly reground and are flat within .001. The sides have been ground square to the bottom. I took the Keen Kutter 7c apart to show that all all parts work. The #3 has been repainted and it needed to be taken apart to do that so I didn't take it apart for a picture. The blades have been precision ground so no lapping is required. The knob and tote on the 7 are rosewood. The keen Kutter is basically a Bedrock round side with the casting numbers changed. Asking $200 plus shipping for the K7 and if you think that is high check out the prices on eBay unground.
Anyway pictures
[attachment=50526]
[attachment=50527]
[attachment=50528]
[attachment=50529]
[attachment=50530]
[attachment=50531]
[attachment=50532]
Asking $95 for the #3 plus shipping
Thanks for looking
Tom
RE: K7C and a Bailey #3 type 11 - tablesawtom - 04-04-2024
K7 is considered sold.
Tom