+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Moxon Vise (/showthread.php?tid=7376468)
Moxon Vise - wood-chips - 08-04-2024
I’ve built a few things lately but haven’t posted pictures, just been looking at others projects/builds. I got started on Christmas projects early this year and completed this moxon vise for a friend for Christmas. His work holding/clamping is severely lacking. I watched several moxon builds and I combined the best features of each with my own design/features that makes it more than a moxon vise.
I Bought the crank handles and 2” delrin on Amazon. I made 3/8” spacers from the delrin. I bought 1/2” washers and bored them out to 17mm, the size of the acme shaft. I bought the springs from ACE hardware. I added cubber to the faces with double stick tape. Both vise faces have clamping/hold down capabilities to provide added flexibility. Finally it’s finished with WATCO.
[attachment=52068]
[attachment=52069][attachment=52070][attachment=52071][attachment=52072][attachment=52073][attachment=52074]
RE: Moxon Vise - barryvabeach - 08-04-2024
Very nice work, they look sharp.
RE: Moxon Vise - Stwood_ - 08-06-2024
Nice job. I like it!