+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Wood shavings bowl (/showthread.php?tid=7376593)
Wood shavings bowl - mtrainer90 - 08-22-2024
Making a bowl out of some large Black walnut, Red Cedar & Honey locust shavings and Alumilite clear slow Resin. Finished with General Finish's wood bowl finish and Acks paste. Because of the quick cure time, even with a pressure pot, there were a lot of bubbles trapped between the shavings unfortunately. All though a deep pour slower curing resin would have been more ideal, this was an attempt to use up the rest of the batch of resin I had before it got too old and went bad
RE: Wood shavings bowl - EightFingers - 08-22-2024
Great way to use up everything!
RE: Wood shavings bowl - MKepke - 08-23-2024
Nice.
That has a really neat visual effect in the depth of field, even though I am generally not a fan of the 'let's cover everything in epoxy' trend.
-Mark
RE: Wood shavings bowl - mtrainer90 - 09-04-2024
(08-23-2024, 09:55 AM)MKepke Wrote: Nice.
That has a really neat visual effect in the depth of field, even though I am generally not a fan of the 'let's cover everything in epoxy' trend.
-Mark
Some people dont like resin but I find it is a very good way to fill voids or spaces on pieces that otherwise would be to far gone to turn