+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: WTB: State Mfg B4 Oscillating Spindle Sander Parts (/showthread.php?tid=7376934)
WTB: State Mfg B4 Oscillating Spindle Sander Parts - Rick_B - 10-04-2024
I’m finishing up a rebuild of a State B4 OSS. I am looking for some spindles and throat plates - specifically I need
Positiv-Lok spindles3/4 X 6, ½ X 6, 3/8 X 6 and 1/4 X 5 and the large throat plate
Let me know if you have any of these you would like to move along
Thanks
Rick
RE: WTB: State Mfg B4 Oscillating Spindle Sander Parts - Tapper - 10-04-2024
You might want to post a note in the BOYD section of OWWM.
Doug
RE: WTB: State Mfg B4 Oscillating Spindle Sander Parts - Rick_B - 10-04-2024
(10-04-2024, 12:35 PM)Tapper Wrote: You might want to post a note in the BOYD section of OWWM.
Doug
Thanks Doug - already did and at practical machinist, garage journal, NCWW, Hobby Machinist, CL and FBMP
Trying to cover as much territory as possible.
Rick
RE: WTB: State Mfg B4 Oscillating Spindle Sander Parts - Tapper - 10-04-2024
Looks like you've covered all the bases. Good luck!
Doug
RE: WTB: State Mfg B4 Oscillating Spindle Sander Parts - Bob10 - 10-05-2024
I went to OWWM and found the thread about when I found mine. Here is the link with a bit if info from the time it may be off help
https://owwm.org/viewtopic.php?f=1&t=25818
RE: WTB: State Mfg B4 Oscillating Spindle Sander Parts - Rick_B - 10-06-2024
(10-05-2024, 10:08 PM)Bob10 Wrote: I went to OWWM and found the thread about when I found mine. Here is the link with a bit if info from the time it may be off help
https://owwm.org/viewtopic.php?f=1&t=25818
Thanks Bob - I have tried State many times - got some email response but no real activity. I think Andy is the only guy left.
Rick