MSU Spartan Inlay Bowl - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: MSU Spartan Inlay Bowl (/showthread.php?tid=7377115) |
MSU Spartan Inlay Bowl - mtrainer90 - 10-30-2024 This 12in by 3in bowl features the Michigan State University spartan cut from Black Walnut inlayed in the bottom of a piece of Spalted Maple using the FoxAlien 4040 XE-PRO. 3 segmented maple rings with a Black Walnut rim make up the sides. The bowl is finished with Acrylic Enamel and polished with Ack's Woodpaste. RE: MSU Spartan Inlay Bowl - EightFingers - 10-30-2024 “It cracked.” Yep, been there, just need to add more slip in your inlay RE: MSU Spartan Inlay Bowl - mtrainer90 - 10-30-2024 (10-30-2024, 02:42 PM)EightFingers Wrote: “It cracked.” The piece I used actually had multiple cracks and defects upon inspecting it. So it had a lot more to do with that than the sizing of the inlay |