Posts: 39
Threads: 0
Joined: Dec 2007
Yesterday a friend called to have me split a 12' church pew in half and put new ends on them. The ones on now appear to be 2 3/4" boards laminated. If I did this would I have any wood movements problems? It proly would be easier to fit to pew end this way. Today my granddaughter wants me to make a sign for her sorority out of wood, I'm thinking cedar, should I use 1 1/2" or would 3/4" laminated be better,my thinking this may be a little stronger, also not sure whether wood movement would be involved in this also, thanks for any advice and help. CA
Posts: 10,732
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Is the pew oak? I'm thinking if you stick to the original construction method of the ends, you'll be OK. Stick to the same wood as the original for the ends.
I'm kinda confused about the sign. Is this separate from the pew? Is it to be applied to the end of the pew? You have two choices on the delta gamma application. You can either rout the delta gamma into a background, or apply raised letters to a field. My vote would be routing the letters. Raised letters are more prone to getting banged into over the years, as the sorority moves the furniture around, with whatever events they have in the sorority house, etc.
Still Learning,
Allan Hill
Posts: 14,956
Threads: 0
Joined: Sep 2004
Location: Butler, PA
Regarding the church pews, you may have wood movement issues. I know that the pews we have in our church, the ends are made with 2 layers of glued up boards, all red oak. Some of them have warped over the years. May be all sorts of factors involved in that and who knows if it was preventable or not, but I see that the wood used for the glue ups are a mixture of riftsawn, flatsawn and quartersawn boards. May have been some variations in environmental conditions that contributed as well, but there is noticeable warpage in some of the ends and also a few small cracks.
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 39
Threads: 0
Joined: Dec 2007
The sorority signs are for my granddaughter's sorority, going to to be the triangle and the upside down L. It's going outside on they're house. I thought laminating my make it stronger but I don't know. thanks for the help on the pew, just got to thinking we are both 75 years old so proly it needs only to last a few years on the pew.LOL
Posts: 2,274
Threads: 90
Joined: Jun 2001
If you are going to do the pews like the original then I think you'll have no trouble - the originals lasted a pretty long time. I know the ones at my church are glue ups. I reduced on several years ago and can't tell I did it.
I'm thinking about others I have seen and think all were glue ups.
As for the sign - cedar is used all the time outside - so good choice there. I think I would just use what ever is cheaper 1 1/2" vs 2 - 3/4" boards. If you laminate the 3/4" in the same direction there would not be any real issues with wood movement. Cross grain - maybe okay - since cedar is fairly soft the wood may give a bit during the different seasons. I would just glue them in one direction this way I wouldn't have to think about the movement.
John
Always use the right tool for the job.
We need to clean house.
Posts: 29,870
Threads: 0
Joined: Jan 2008
Location: Mid-MI
Mark
I'm no expert, unlike everybody else here - Busdrver
Nah...I like you, young feller...You remind me of my son... Timberwolf 03/27/12
Here's a fact: Benghazi is a Pub Legend... CharlieD 04/19/15
Posts: 40,273
Threads: 0
Joined: Apr 2007
That's the way the pews I tore apart were built too.
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
