Posts: 1,028
Threads: 0
Joined: Apr 2011
Here's another gem from my father's tool box, but I don't know for certain what it is used for.
My first guess is that it's some sort of a clamp, but I don't know for certain.
I welcome your experienced insight ... and wild guesses too
Link to one minute video -
What Is it?I'd also like to know how to embed a video in this forum like I do a picture, so that whenever I do share a video it can be viewed without leaving the forum.
Ray
Posts: 51
Threads: 0
Joined: Mar 2007
It is gear puller. Also useful for pulling pulleys. ( a pulley puller ). The hooks hold the outside of the gear or pulley that is on shaft, and when you turn the screw against the end of the shaft, the gear or pulley is removed.
Posts: 1,028
Threads: 0
Joined: Apr 2011
thanks!
now I'll test my son, the know it all aspiring mechanic, if he know what it is
Ray
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Also known as a bearing or gear puller. Removes any round object that is press fit onto a shaft.
Still Learning,
Allan Hill
Posts: 2,274
Threads: 90
Joined: Jun 2001
It might be a gear or pulley puller.
It is kind of old. You can turn the arms around and pull from inside a pulley. Some pulleys have the outside attached to the inner part with rubber so you need to pull from the inside ring.
John
Always use the right tool for the job.
We need to clean house.
Posts: 19,681
Threads: 0
Joined: Aug 2001
>>>> What Is it?
It's [primary use is to pull a gear off of a round shaft. It's also used to remove a fa blade from a shaft.
Howie.........
Posts: 1,030
Threads: 3
Joined: Jun 2011
Location: N. Cincy inside the loop
Gear puller .....
I was going to say wheel puller, but same animal - different name.
Posts: 2,581
Threads: 0
Joined: Apr 2012
DogwoodTales said:
Snip...
I'd also like to know how to embed a video in this forum like I do a picture, so that whenever I do share a video it can be viewed without leaving the forum.
Like this?
https://www.youtube.com/watch?v=oibQBlgP...e=youtu.beEasy - just paste the URL from the video host into your message and the video window pops up by magic.
Posts: 1,028
Threads: 0
Joined: Apr 2011
I tried that. I know how to embed, but for some reason I can't get it to work on this forum.
Ray
Posts: 2,581
Threads: 0
Joined: Apr 2012
