Posts: 245
Threads: 0
Joined: Jul 2003
Building a farm table out of a hickory tree that was killed by storms in 2011
I want my grandson to sign the underside because some day I'm sure this will be inherited by them.
I plan on using Arm r seal to finished the table.
What kind of pen could I use that would not smear?
Thanks
Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
I use pencil. My study of antiques showed me that all inks fade over time but pencil stays pretty fresh.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 12,909
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Sharpies work well for me. I have a cutting board that's about 11 years old now that I signed with a Sharpie and it hasn't faded at all. Once dried, Arm-R-Seal goes over it with no problems.
Whatever you use be sure to give it a try on some scrap to make sure it works as you expect.
John
Posts: 1,474
Threads: 0
Joined: Mar 2011
+1 for pencil. When I rebuilt the barn in our back yard about ten years ago I found 'this barn built September 1887 by Noah Halsey' written in pencil on one of the collar ties. How long do you need yours to last?
Jim
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Have moved furniture, torn down walls and hauled off old lumber dating back to the 20's with the clearly written pencil marks still on the wood.
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Use a "soft" pencil with more graphite than clay and it will last.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 24,682
Threads: 1
Joined: Jul 2002
Location: St Boni, MN
Check out a paint pen. Might be the ticket for what you want.
Mike
If you're the smartest person in the room, you're in the wrong room!
But not today...
Posts: 3,859
Threads: 0
Joined: Nov 2000
Drill a small hole in the bottom and affix a penny there too. Get one minted the year the table is put into service.
Those are the coolest little discoveries on old, antique furniture.
Posts: 1,415
Threads: 0
Joined: Apr 2010
Uniball Signo RT is the only pen that I have found which, once the ink is dry, will not smear with polyurethane, shellac, or lacquer. If you sign & start wiping a finish on right away, it will though - need to sign and then either let it have time to dry or pad a few layers of finish on by using a straight up-down motion first. (Can you tell I'm primarily a turner & like to get done *N-O-W*?
)
"I'm glad being trapped in the woods hunted by an insane militia made you ask the big life questions."
Check out my
Project Blog
Posts: 1,411
Threads: 1
Joined: Jun 2008
Location: Burke, VA
Electric branding iron with year attachment numbers. Number 1 or 2 pencil also works well.
