Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
10-31-2016, 02:08 PM
(This post was last modified: 10-31-2016, 02:09 PM by Rob Young.)
(10-31-2016, 10:47 AM)BloomingtonMike Wrote: Rob, try an airless for paint.
No primary need to paint with system I have. I can push latex enamel to do trim (should I decide to paint existing trim instead of re-making from nicer looking stock) w/out serious effort. Would not use to paint walls though.
Honestly, I hate house painting. I'd rather pay somebody to paint the outside of my house. Prep work, priming, scaffolds, heat, bugs, mess...
Inside, I can use a roller for wall paint.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Posts: 64,682
Threads: 3
Joined: Feb 2007
Location: Merryland
(10-31-2016, 02:05 PM)Rob Young Wrote: Other choices of less than 4 stage turbines. None of which fall into the small incremental gains you mentioned. The improvement over the last 10 years is such that there are more than 1/2psi improvements per stage. And around +30cfm per stage.
And that there are valid reasons to go with a turbine system instead of a conversion gun.
Sure, I have valid reasons for using turbine equipment, I use it every day but it doesn't appear that the OP has valid reasons to use high end turbine equipment.
From the OP
Budget: $400.00 to $500.00.
I cannot justify spending a larger amount based upon the amount of use it will see.
Suggested options would be appreciated.
I'm, not seeing how a high end 4 stage unit has anything to do with his requirements. I need to get to work each day and I manage to get there every day without driving a Lamborghini.
