Posts: 912
Threads: 0
Joined: Nov 2004
I'm working on several jewelry boxes for gifts. I use adhesive-backed velvet -- usually black in color -- to cover the 1/4" ply box bottom. When I last made a few of these, I was able to find large sheets of adhesive-backed velvet at an affordable price. (Rocker carries it, but at a ridiculous price. An on-line search hasn't been very helpful -- again very high prices for single sheets of a fixed measure.) Do you know of a source for this product? Since I use it pretty freely, buying in bulk would be fine with me. Thanks!
Posts: 1,997
Threads: 1
Joined: Aug 2016
10-21-2016, 02:30 PM
(This post was last modified: 10-21-2016, 02:32 PM by Roly.)
Try this
LINK and see if it what you want. Comes by the foot 48" wide Roly Scroll down to velvet fabric.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
When you want real bulk, talk to the Alibaba man
Outside of that it's pretty much piecemeal online.
A lot of this
If it were me looking I would go local on this, and first stop would be the biggest fabric store around, they would probably have to order it, but they could get something, probably from a guy, who knows a guy, who knows Alibaba.
Actually I lied. If it were me, I would use
Donjer Flocking By the time you cut the paperbacked stuff, and fit it tight to all the corners, and made sure you were all set, you could flock 5 boxes, just saying.....
Worst thing they can do is cook ya and eat ya
GW
Posts: 3,390
Threads: 1
Joined: Jan 2002
Yup. Go Flock yourself.
Somebody had to say it
-Marc
Posts: 912
Threads: 0
Joined: Nov 2004
Good ideas; McMaster Carr fits the bill exactly. Thanks teach of you for your suggestions. One of these days I'll have to try flocking.
Posts: 745
Threads: 0
Joined: Mar 2006
I go to a fabric store (like Joanne Fabrics) and buy the material and some poster board. I cut the poster board to size and use spray adhesive to bond the fabric to the poster board. Then it is a simple matter to use double sided tape, glue, or spray adhesive to bond the poster board to the bottom or side of the box.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I used to be a picture framer. We used fabric covered mat board to cover the interiors of shadow boxes. It is quick and looks totally professional. I recommend it.
You can buy the mat board wholesale from UMS:
http://www.unitedmfrscatalog.com/home/index.htm
You cut the pieces to size and you can use any glue to stick the rigid pieces in place. We always used adhesive transfer tape from an adhesive transfer gun.
https://www.amazon.com/Scotch-Adhesive-A...B007VTQC64
No animals were injured or killed in the production of this post.
Posts: 912
Threads: 0
Joined: Nov 2004
Thanks for the help--good ideas and experience brought to bear to solve the problem. I'll check out our local fabric shop.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I just looked it up, and neither Crescent nor Bainbridge is offering velvet covered board anymore. Apparently the surface was too easily bruised. They are offering silk and linen covered boards, and if those suit your taste that is a very efficient way to line a box.
If you know someone with a dry mounting press (photographers and picture framers have these) it is a much more efficient way to mount fabric onto board than using spray.
Also using positional mounting sheets is a foolproof way to mount fabric to board. You lay the sheet on the board and using a squeegee (supplied with the adhesive) you transfer the adhesive to the board. Then you apply the fabric which can be re-positioned as required. After you've gotten all the wrinkles out of the fabric you put the release paper that you removed over the fabric and use the squeegee again to permanently bond the fabric to the board.
It is two steps, but very clean and re-positionable.
Available from Amazon.com
https://www.amazon.com/568-Positionable-...+sheets+3M
No animals were injured or killed in the production of this post.
