|
Bandsaw blades and Reindeer
|
12-16-2016, 09:55 AM
At around 17:00 Alex goes from resaw to small blade guide. He says strictly for 1/4" or less. When I have seen him he has used a 3/16" for reindeer, and bandsaw boxes, and switches to an 1/8" @ 30:15 to make a snake (really tight turns)
Worst thing they can do is cook ya and eat ya
 GW 
12-16-2016, 01:01 PM
Here you go Dave
http://www.grizzly.com/products/80-x-3-1...rizzly.com and the rest of the page too http://www.grizzly.com/search?q=(band+AN...s+OR+80%22) The first one will be awesome blade for you also the one below is for very tight curves http://www.grizzly.com/products/80-x-1-8...rizzly.com
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing. 
12-20-2016, 02:24 AM
Thanks to everyone that replied.
I think Carter will be getting an order soon. I watched the video Steve provided and that gave me an idea. Right or wrong I pushed out the upper guide bearing just a touch to tension the blade and I actually got them cut out much easier. It will be touch and go on getting them done by Christmas but we'll see.
Dave
 "Amateur Putzing in Shop." Northern Wood on Norm 5/07 "Dave's shop is so small you have to go outside to turn around" Big Dave on my old shop So I built a new shop. (Picasa went away so did the link to the pictures) |
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
