Posts: 935
Threads: 0
Joined: Aug 2001
Good morning everyone! I am in need of the collective knowage of this trusted group - please help....
Subject: white moisture rings on an antique table top.
Question: does anyone have a solution, a tried and proven method? The internet of full of suggestions, from the weird to the witchcraft, i'm hoping for some solid advice.
Thanks for the help.
...the one thing I can make perfectly every time, without fail, is a mess!
Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
I have seen a ytube, wipe the area with denatured alcohol, while still wet light it off, white ring gone.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 3,217
Threads: 0
Joined: Jan 2006
Just give it a very light spritz of denatured alcohol and the rings shoul go away.
Posts: 64,682
Threads: 3
Joined: Feb 2007
Location: Merryland
(01-28-2017, 08:27 PM)Dave Diaman Wrote: Just give it a very light spritz of denatured alcohol and the rings shoul go away.
... Dave D, the E.F. Hutton of fine furniture.
Posts: 675
Threads: 0
Joined: Aug 2011
I do touch-ups professionally and this is a regular repair job.
I tried the light it on fire once, just once, and it blistered the finish. Can't do that at a customer's home, in front of them. ;-)
I have used the wipe with denatured alcohol and it can work, particularly with shellac.
For modern furniture, I use these and have never had a failure
http://www.homedepot.com/p/Homax-Furnitu.../202698033
Posts: 3,182
Threads: 0
Joined: Sep 2004
Location: Piedmont North Carolina
(02-06-2017, 09:22 PM)bhh Wrote: I have used the wipe with denatured alcohol and it can work, particularly with shellac.
For modern furniture, I use these and have never had a failure http://www.homedepot.com/p/Homax-Furnitu.../202698033
Went to the link and read the reviews - seems to work well most of the time! So, I was curious and found the MSDS sheet
HERE - as circled on the image below, seems to be petroleum distillates w/ some kind of paraffin preparation - need to get my hands on some of these cloths! :
Dave
![[Image: HomaxRingCloth.png]](https://photos.smugmug.com/Other/WW-Projects-Samples/i-xXPqSnP/0/O/HomaxRingCloth.png)
Piedmont North Carolina
Posts: 1,030
Threads: 3
Joined: Jun 2011
Location: N. Cincy inside the loop
02-26-2017, 12:12 AM
(This post was last modified: 02-26-2017, 12:15 AM by wood2woodknot.)
I always questioned this approach, but recently gave it a try and it worked. There was a white ring on a golden oak dining room table. I took a dab of mayonnaise and rubbed it in with my finger; then buffed it out with a paper napkin. The ring disappeared as I rubbed in the mayo. Buffing left the surface sheen blend in perfectly with the surrounding area. I don't know how this works, but it did. I don't know if this is a permanent fix or if the ring reappears down the road, but two minutes of application was the quickest repair I ever made.
I would be interested if anyone can explain why this works.
