06-10-2017, 07:55 PM
Hard to take decent pics in a skinny room... but here we are. This was a perfectly functional but very basic, builder grade closet. Low quality MDF, wood closet rods. Remodel necessitated when I moved the dryer vent and it had to go right through the cubby shelf that used to be where the mirror is now. Once I took that out, it seemed like a good time to just do the whole thing.
Under the shoe shelf is a removable box/cover that hides the dryer vent. So basically, I added a 5 drawer chest on each side, some adjustable shelves on each side, and made everything deeper so the top shelf is more useful. Used the better quality MDF (Home Depot) and poplar trim, all painted semigloss Navajo white. Everbuilt white steel rod and brackets. Doing it again, I'd use melamine instead of the MDF. Anyway... nothin' fancy... but a decent amount of work involved. Someone may recognize the box in the first picture... I bought that from a Woodnetter several years back.
Under the shoe shelf is a removable box/cover that hides the dryer vent. So basically, I added a 5 drawer chest on each side, some adjustable shelves on each side, and made everything deeper so the top shelf is more useful. Used the better quality MDF (Home Depot) and poplar trim, all painted semigloss Navajo white. Everbuilt white steel rod and brackets. Doing it again, I'd use melamine instead of the MDF. Anyway... nothin' fancy... but a decent amount of work involved. Someone may recognize the box in the first picture... I bought that from a Woodnetter several years back.