Posts: 175
Threads: 0
Joined: Dec 2016
Emptying a trash can full of planer shavings to a trash bag can be a problem. Put the bag over the top of the can, turn the can upside down, then try to extract the can from the bag doesn't work as the bag clings to the sides of the can by the vacuum created. This morning I tried inserting a 1 1/2" piece of PVC tubing between the outside of the can and the bag, pulled the can upwards and the shavings transferred to the bag and the can removed easily, no hassle at all. Thinking perhaps a length of 2X4 would accomplish the same thing as the PVC.
Posts: 12,923
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Some folks line the trash can with a bag first.
John
Posts: 3,217
Threads: 0
Joined: Jan 2006
10-23-2017, 11:04 AM
(This post was last modified: 10-23-2017, 11:05 AM by Dave Diaman.)
(10-23-2017, 09:50 AM)jteneyck Wrote: Some folks line the trash can with a bag first.
John
Like John said you can just put the bag in first. If you put the bag in and toss a wood scrap into the bottom it will keep the bag from being sucked out of the can. As the sawdust fills the bag it pushes the bag against the walls of the can.
Posts: 22,328
Threads: 0
Joined: Dec 2005
Location: Oakdale, MN
(10-23-2017, 09:50 AM)jteneyck Wrote: Some folks line the trash can with a bag first.
John
+1
I have an oneida system, and there is a pressure hose that keeps it from being sucked up. Super slick.
Once Favre hangs it up though, it years of cellar dwelling for the Pack. (Geoff 12-18-07)
Posts: 1,899
Threads: 0
Joined: Jan 2010
A piece of rolled up laminate could be used to keep the bag in place.
Grizzly/shop fox make a metal sleeve that fits inside the bag to keep the bag in place.
My .02
Karl
Posts: 29,152
Threads: 1
Joined: Aug 2002
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy