Posts: 469
Threads: 0
Joined: Jan 2008
Location: Peoria, AZ
I finished a fireplace mantle I've been working on with Arm-R-Seal Satin and, even after stirring it before use, it has more of a sheen than I desire. What can I use to remove some of the sheen? Would using paste wax and 0000 steel wool work in this instance? Any ideas/tips would be appreciated. Thanks!
Posts: 12,926
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(03-19-2018, 06:56 PM)greatscott Wrote: I finished a fireplace mantle I've been working on with Arm-R-Seal Satin and, even after stirring it before use, it has more of a sheen than I desire. What can I use to remove some of the sheen? Would using paste wax and 0000 steel wool work in this instance? Any ideas/tips would be appreciated. Thanks!
Yes, 0000 steel wool and paste wax will give you a beautiful dull satin sheen. Another approach is to use Micro Mesh or Abralon abrasive pads. In either case, let the ARS cure for about a week before you do it.
Of course, you could stir the ARS really well and put on another coat of satin.
John
Posts: 12,613
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Automotive rubbing compound or polishing compound will also work, like John said, be sure to let it sure a little before doing it.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 469
Threads: 0
Joined: Jan 2008
Location: Peoria, AZ
Thank you both for the replies. Last coat went on Fri so I'll let it cure for a week before doing anything.
Posts: 6,179
Threads: 0
Joined: Dec 2002
Location: Bothell, WA
03-22-2018, 07:57 PM
(This post was last modified: 03-22-2018, 08:00 PM by SteveS.)
pumice or rottenstone in cheesecloth with MS.
Cellulose runs through my veins!
Posts: 6,108
Threads: 0
Joined: Jan 2006
Location: Central Kentucky
Another option is Wool Lube from Behlen and grey scotchbrite pads. I have used this on Poly, Varnish, and shellac with great results.
