05-09-2018, 05:21 PM
(05-09-2018, 01:54 PM)DaveBozeman Wrote: Slightly off topic, but close...
I am going to lay down MDf, or plywood, or particle board, between section, so the wood is always 100% supported, or close to it
I was going to use MDF, because it's cheap... sound ok?
I'm doing my supports on the studs, so 32" apart
MDF and PB will sag, even at your planned 32" spacing.
One of your cull, lesser 1" boards will be better support than the man made stuff.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
