FazLok Connectors

[wjt]

I have used a couple of these for years and occasionally they have disconnected. I finally decided to do something about it.

A simple fix. With the bayonet connector fully engaged I drilled a 1/8" hole through both halves of the connection. I made a push pin from a 1/8" aluminum rivet and a mini shaker peg. Gravity and a press fit keep the pin in place but is easily removed if I need to move the hose to another port.

Bill

[EvilTwin]

I wasn't even sure what a fazlok connector was, but that looks like a nice solution. I probably would have just drilled a short sheet metal screw through it.