Hello once again everyone here's my latest piece "Ellipse" Ellipse is a piece that is made from 6 turnings cut apart and reattached, the carved portion is Mahogany the main body base and ring are Teak. The piece is 10" x 10" the coloring was done w/ a combination of wood dye and Deco Art Metallics Acrylic paint and then finished w/ lacquer. The carved portion is a shell that fits around the main body, and the center section can be moved how ever you chose and the carved shell is removable as well.
(09-20-2018, 12:31 PM)Arlin Eastman Wrote: ^^^^ What he said. That carving is what I would like to learn and you have it down pat. Do you use a power carver or by hand?
Do you have a shot of the back side? Also how thick is it?
Thank you Arlin... I do most of the work by hand I used a small Dremal in a few spots.
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
(09-21-2018, 08:03 PM)BrokenOlMarine Wrote: I like it. Some are very creative in their woodworking.. doing things off the cuff.
(or maybe I should say, thinking outside the box.)
Thank you very much Jim that's what I'm shooting for things on the different side.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
That carving is what I would like to learn and you have it down pat. Do you use a power carver or by hand?
