Posts: 482
Threads: 0
Joined: Nov 2006
I have 3/4" x 1/4" stained scribe molding for the kitchen cabinets. Used to cover gap between cabinet and wall/ceiling.
I thought Iwould use the pin nailer because of the fact that you can't see the hole, but will they hold? I have the glue covered version of the nails 23ga 3/4".
What do you folks use?
Saratoga, NY
Posts: 81
Threads: 0
Joined: Jul 2010
(01-05-2020, 12:37 PM)RJT123 Wrote: I have 3/4" x 1/4" stained scribe molding for the kitchen cabinets. Used to cover gap between cabinet and wall/ceiling.
I thought Iwould use the pin nailer because of the fact that you can't see the hole, but will they hold? I have the glue covered version of the nails 23ga 3/4".
What do you folks use?
Yes, they hold quite well as a matter of fact. And since they have tiny heads that don't really show, you can use more than you might if using a larger gauge nail/pin.
Posts: 12,882
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Pin nails have amazing holding strength for being so tiny. I think you'll be pleased with how well they work for your application.
John
Posts: 482
Threads: 0
Joined: Nov 2006
Well then, I will give it a try tonight.
Thanx.
Saratoga, NY
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
01-07-2020, 06:42 PM
(This post was last modified: 01-07-2020, 06:42 PM by Stwood_.)
I always used 18ga, which is hard to see in stained wood.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
