Guys,this just some tools which all work plus extra's. Some of these has value but anybody can go buy rubber hammers which they are nice but I don't need two sets. If there is room in box there will be bonus pieces added just to move them on to someone who may be able to use them.
Hornet Hammer Drill-It works and I have use it,but it does need a cord or some good tape.
S/S- Switch and its new I purchase it for one of my BS,sold it so it must go.
Auger Bits-1/4 is MIA I have use these when I was wiring my shop but they still work.
Kreg Drawer Slide Jig-Its new,I was pump at the WWing show
1/4 Shelving Pins Bag full
Screws-I use these to screw plywood together either on end or flat.That's what these are made for has big flat head.
Carpenter Pencils-I have box full
Craftsman-Scroll Jig Saw,it works perfectly well
Deep Breath
45.00 Ship to your door lower 48 states
Hornet Hammer Drill-It works and I have use it,but it does need a cord or some good tape.
S/S- Switch and its new I purchase it for one of my BS,sold it so it must go.
Auger Bits-1/4 is MIA I have use these when I was wiring my shop but they still work.
Kreg Drawer Slide Jig-Its new,I was pump at the WWing show
1/4 Shelving Pins Bag full
Screws-I use these to screw plywood together either on end or flat.That's what these are made for has big flat head.
Carpenter Pencils-I have box full
Craftsman-Scroll Jig Saw,it works perfectly well
Deep Breath
45.00 Ship to your door lower 48 states