Posts: 1,899
Threads: 0
Joined: Jan 2010
I am looking for a 90* plastic elbow.
BUT...… I need it to have a female 2.25" end and a 2.25" male end.
Both ends need to have the slight taper for a shop vac hose.
So far I've only found 2.5" elbows for dust collection hose.
Any suggestions are welcome.
My .02
Karl
Posts: 7,421
Threads: 1
Joined: Sep 2005
No animals were injured or killed in the production of this post.
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
(05-13-2020, 10:38 AM)measure once cut remeasure Wrote: I am looking for a 90* plastic elbow.
BUT...… I need it to have a female 2.25" end and a 2.25" male end.
I've got clear plastic elbows on one of my router tables. I'll ck the size and try to remember where I got them.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 1,621
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
Item 9 on
this list at Incra is what you're looking for. $4 + shipping. They sold one to me--the only item on the order and didn't charge extra for a minimum purchase.
g
![[Image: PC-WONDERFENCE_body1_v3.png]](https://www.incrementaltools.com/v/vspfiles/assets/images/PC-WONDERFENCE_body1_v3.png)
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 24,158
Threads: 2
Joined: Sep 2003
Location: Missouri
Looks like that's right on the money there.
Mine is a male/female 90 elbow but in 2-1/2" size.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 1,899
Threads: 0
Joined: Jan 2010
(05-13-2020, 11:29 AM)shoottmx Wrote: Item 9 on this list at Incra is what you're looking for. $4 + shipping. They sold one to me--the only item on the order and didn't charge extra for a minimum purchase.
g
Thanks everyone for your input.
I think I found the same part from Oneida air systems #
AHA000004
I just ordered a track system from incra less than 2 weeks ago. Shipping was quite timely, so I may go that route again.
Oneida air is closer, but being in upstate NY they could be shutdown as a nonessential business.
My .02
Karl
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
(05-13-2020, 10:38 AM)measure once cut remeasure Wrote: I am looking for a 90* plastic elbow.
BUT...… I need it to have a female 2.25" end and a 2.25" male end.
Both ends need to have the slight taper for a shop vac hose.
So far I've only found 2.5" elbows for dust collection hose.
Any suggestions are welcome.
Put tape either inside or outside of the mating surface.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 16,751
Threads: 2
Joined: Oct 1999
(05-13-2020, 01:49 PM)measure once cut remeasure Wrote: Thanks everyone for your input.
I think I found the same part from Oneida air systems # AHA000004
I just ordered a track system from incra less than 2 weeks ago. Shipping was quite timely, so I may go that route again.
Oneida air is closer, but being in upstate NY they could be shutdown as a nonessential business.
Incra would easily be my choice - I've had great customer experiences there! Maybe Oneida is just as good, just never dealt with them.
Good luck,
Doug
