Chisel type/use?

[OneStaple]

Hey,

I picked up this chisel in a purchase of a group of mixed chisels. It looks specialized and I've never seen a similar one. It's double bevel. What would this be used for?

Thanks,
Tyler

[cams2705]

My guess would be to cut dovetails in the base of turning blanks to be held in chuck jaws.

[OneStaple]

It shares some similarities in shape with a dovetail cutter for the lathe. But this is only 8.5" long, which is really short for a lathe tool. And all the dovetail cutters I've seen are scrapers, not a double bevel cutter.

This appears to have a fairly short life as well, since the number of times you could sharpen the end is fairly limited before it disappears.

Could this be some sort of variation on a fishtail chisel?

Tyler

[AHill]

I think that's a carving tool and not a chisel.

[Ohio Mike]

Hey,

I picked up this chisel in a purchase of a group of mixed chisels. It looks specialized and I've never seen a similar one. It's double bevel. What would this be used for?

Thanks,
Tyler

Looks a lot like a detail skew carving tool except the steel shank on yours is much longer.



Mike

[Timberwolf]

I think that's a carving tool and not a chisel.

............................
Same here...

[OneStaple]

Yup! Looks like you figured it out! Thanks for playing "name that tool". Thought it had a weird shape for a chisel.

Not sure what I'll use this for, but maybe it'll be helpful someday. Not really into carving.

Tyler