Posts: 4,027
Threads: 0
Joined: Nov 2010
<p>There is a sign, somewhere...."Don't feed the TROLLS" <br></p><p><br></p><p> <img src="https://www.forums.woodnet.net/images/graemlins/yellowno.gif" data-sceditor-emoticon="
" alt="
" title="
"> <img src="https://www.forums.woodnet.net/images/graemlins/yellowno.gif" data-sceditor-emoticon="
" alt="
" title="
"> <img src="https://www.forums.woodnet.net/images/graemlins/yellowno.gif" data-sceditor-emoticon="
" alt="
" title="
"> <br></p>
Show me a picture, I'll build a project from that
Posts: 2,384
Threads: 0
Joined: Dec 2011
<p>Please don't misclassify spirited or interesting discussions that you don't like as trolling. Forums are boring and dead if there's only one single, identical view in circulation.</p><p><br></p><p>Simon</p>
Posts: 869
Threads: 0
Joined: Jun 2008
I think someone already mentioned it, but I layout dovetails, cutting tails first, with the chisel I want to chop with. That sets the back of the tail. I add a little wiggle room to both sides of the width of the chisel. Then I decide how small I want the small part of the pin to be. I don’t think I ever make it less than 1/8”.
I’ve never much thought about the angle. I will say if you make the angle too high, it’s harder to chop out the tails.
For Derek, on pieces that have the little pins, drawer fronts are often the only dts that exhibit that design. I honestly don’t know why they did it. But I’ve seen museum pieces with figured drawer fronts that twisted. I think 18th c craftsmen were well aware of the danger of exposed end grain. Many repaired furniture.
17th c and earlier furniture often made drawers with rabbeted and nailed sides. I’ve done it myself and it makes a good drawer. My guess is, dovetailed drawers held up better and required no hardware.
Posts: 4,226
Threads: 0
Joined: Jan 2007
(09-26-2021, 10:59 AM)Derek Cohen Wrote: A dovetail is a mechanical joint designed to be made with hand tools, and will hold together when the glue fails.
A finger joint is designed to be made with machines. It relies on glue for strength, and will fail when the glue does.
Regards from Perth
Derek
I always say:
Finger joints — all the hassle of a dovetail joint, without the mechanical advantage.
Hail St. Roy, Full of Grace, The Schwarz is with thee.
Blessed art thou among woodworkers, and blessed is the fruit of thy saw, dovetails.
Holy St. Roy, Master of Chisels, pray for us sharpeners now, and at the hour of planing.
Amen.
$300 is a lot of Money!
giant Cypress: Japanese tool blog
Posts: 4,027
Threads: 0
Joined: Nov 2010
Hmmmm...have been doing those finger joints for how long.....and NEVER had one fail....might be in HOW they are being done? YMMV
Show me a picture, I'll build a project from that
