Posts: 196
Threads: 0
Joined: Mar 2022
I have a 5" wide, by 5" deep, by 34" long area of concrete, that was poured into a foundation wall, to support a new door installation. How long do I have to wait before I can drill and install 3/16" Tapcons?
Thanks Greg
Sometimes it's better to keep your mouth shut, and have the world think you a fool, than to speak and remove all doubt.
Posts: 4,646
Threads: 0
Joined: Jan 2008
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
How stressed will the screws be? If much stress, the longer the better. If not a lot a week should be plenty.
Pay attention to how hard it is when you're drilling the hole. If it drills easily it may not hold the screw well.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 1,936
Threads: 0
Joined: Feb 2008
(05-26-2022, 06:28 PM)Wild Turkey Wrote: How stressed will the screws be? If much stress, the longer the better. If not a lot a week should be plenty.
Pay attention to how hard it is when you're drilling the hole. If it drills easily it may not hold the screw well.
They're Tapcons. It may not hold the screw well no matter how long you wait.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I would not use tapcons. I would get some nails and drill a slightly undersize hole, then hammer the nails in. They won't pull out. If you also use construction adhesive, the door sill will never move. I know this from experience.
Posts: 4,444
Threads: 0
Joined: Jan 2005
(05-26-2022, 06:27 AM)Gregor1 Wrote: I have a 5" wide, by 5" deep, by 34" long area of concrete, that was poured into a foundation wall, to support a new door installation. How long do I have to wait before I can drill and install 3/16" Tapcons?
Thanks Greg
When the concrete turns white you can drill and install the fasteners. Usually 24 hrs or less.
mike
