Posts: 196
Threads: 0
Joined: Mar 2022
I cannot tell you how impressed I am with the Incra 1000 HD. I have 3 table saws. A Bosch 10" job site saw, a Dewalt 10" job site saw, and my unisaw. I have 1 Incra and plan to order 2 more. Each saw will have it's dedicated miter gauge. I have made sleds for all of these saws, and the Incras will make them pretty much obsolete. Making lap joints in 3/16" X 3/16" material, is close quarter work. The Incra made it simple and easy. If there is a better miter gauge out there, I would like to hear about it.
Greg
Sometimes it's better to keep your mouth shut, and have the world think you a fool, than to speak and remove all doubt.
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
There are actually several excellent after market miter gaiges available, and each one has it's share of fans. I have an Incra, and have found it to be just what I need...but I'm fairly certain some of the other would be just as good.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 16,607
Threads: 2
Joined: Oct 1999
06-12-2022, 11:44 AM
(This post was last modified: 06-14-2022, 11:30 PM by Tapper.)
I have the 1000SE and use it on my SS PCS - equally as pleased. Wouldn't want to do without it.
Doug
P.S. My experiences with Incra with both their products and services have been very positive; great company to do business with IMO.
Posts: 10,775
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
SE owner here too. Excellent tool, no complaints, use it on a Uni..
Ed
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
Has anyone compared the 1000SE with JessEm Mite-R-Excel II?
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
I have this one:
https://www.homedepot.com/p/POWERTEC-Uni.../312361334
Very similar to Incra at a bit less cost. For me, it works just fine. I added a wood sliding fence to it.
Posts: 196
Threads: 0
Joined: Mar 2022
I received a new Incra 1000 HD today. The miter bar was bent up and down, right out of the box. Going back to the jungle.
Sometimes it's better to keep your mouth shut, and have the world think you a fool, than to speak and remove all doubt.
