Posts: 7,008
Threads: 0
Joined: Aug 2004
Location: Perth, Australia
I am such a klutz much of the time. Trying to do things too quickly .. knocking over parts, or even a completed piece. Don't you hate it when you do this, and dent an edge?
Step #1: wet the section (or not - not as important as the next step, but this wood is hard) ...
Step #2: use a wet cloth and a hot iron (I have my own, discarded from the house, and kept in the workshop) to steam the dent out ...
Step #3: a light scraping and there is little evidence of the insult ..
Regards from Perth
Derek
Posts: 2,115
Threads: 0
Joined: Apr 2005
I did the same thing and used the exact same method to get rid of an impact depression in a table top. Worked great for me.
Nice job on your repair...Tom
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
A timely post.
I was just looking at a Paul Sellers video on the same subject.
He did not address outer edge nicks directly, where most of mine occur.
Thank you for your post!
Ag
Posts: 372
Threads: 0
Joined: Feb 2008
this could not have come at a better time... I'll try this on a recent bump of my own.
thanks
Pat
Posts: 1,084
Threads: 0
Joined: Mar 2006
Nice fix can't tell there was a dent.
Posts: 4,764
Threads: 0
Joined: Sep 2009
Location: The GA Lowcountry
Old gunsmiths trick for rehabbing stocks. Works for nearly any wood and any form of woodworking. Nice reminder.
---------------------------------------------------
When something has to be done, no one knows how to do it. When they "pay" you to do it, they become "experts".
Posts: 478
Threads: 1
Joined: Apr 2013
I use a bit different method. I use a thick rag, wet just the tip, and heat just a small spot right over the dent using a Wen 300 watt soldering iron. Works fast.
Posts: 5,180
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Has anyone tried this on............ siding? I have a dent , and I mean
a palm sized dent on an exterior wall of my wood shop. It is not a big deal, has been there for years now. But I might just try this one day.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 730
Threads: 0
Joined: Apr 2010
Location: Olathe, Kansas
I've used this technique to improve surplus M14 stocks. Works great.
Mike
Funny on occasion, embarrassing on average.
Posts: 445
Threads: 0
Joined: Dec 2010
That is certainly ready for a TV commercial selling "dent removal" irons for woodworkers. Have you applied for the patent?
excellent results. thanks for posting.
that you also aspire to lead a quiet life, to mind your own business, and to work with your own hands, as we commanded you...
1 Thessalonians 4:11
my blog - thechristiantoolcabinet.wordpress.com
