Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
http://www.toolbarn.com/irwinquickgrip-2...;ad=40667862494If I want to remove the handle from the screw in a hand screw clamp, any idea how? The screw is metal with a metal ferrule and a wood handle. This isn't it but it is just like it....meaning the link.
thanks
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 1,474
Threads: 0
Joined: Mar 2011
I think there is a cross pin under the ferrule.
Jim
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
Hey, it's more like a steel dowel.
my thoughts are drilling maybe bit it semi there's a better way.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 1,601
Threads: 0
Joined: Jan 2014
Possibly driving it out with a pin punch, or properly size nail, with the point cut off/flattened...
Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
Scott W said:
Hey, it's more like a steel dowel.
my thoughts are drilling maybe bit it semi there's a better way.
I really need to read before I post. Predictive text is funny.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 479
Threads: 0
Joined: Jul 2004
THat ususaly happens to me when I'm not wearing my glasses
