Posts: 1,076
Threads: 0
Joined: Dec 2004
Anyone have a part number handy? Don't have manual handy and not finding it online.
Thanks,
Tommy
Posts: 29,152
Threads: 1
Joined: Aug 2002
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 31,093
Threads: 2
Joined: Mar 2003
Location: Athens, TN
Go to your local NAPA or Autozone and match it. Its a generic thing.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 12,130
Threads: 0
Joined: Jun 2003
Belts from the 22104, 22114, and Steel City 35601, 35605, and 35610 should also fit.
Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Gotta ask did yours get off a groove and get eaten up? Serpentine belts on machines will last for many many years as they don't have as much pressure on them (bearings last much longer as well)
Posts: 322
Threads: 0
Joined: Aug 2005
I had a 2003-4 22124 and the belt and pulleys were 1 rib less than the later units. Don't know when the change was made. IIRC, It increased from 5 to 6 ribs.
