12-19-2016, 07:59 PM
(This post was last modified: 12-19-2016, 08:00 PM by JimReed@Tallahassee.)
Here is a picture of my latest project. I found the rusty legs on that on line auction site. They got wirebrushed and painted. I had a stash of hickory in the shop that was the right size, so I edge jointed two pieces with a #7 and #62 and put a bevel on each with a #72. I picked up some all thread rod at HD and cut it to length. Phase II of the project is to add the cutter bar. But I wanted to get this thing into service for Christmas wrapping duty.
![[Image: DSCN1261.jpg]](http://i224.photobucket.com/albums/dd201/jimreed2160/DSCN1261.jpg)
And here is a shot of it loaded and ready for gift duty.
![[Image: DSCN1261.jpg]](http://i224.photobucket.com/albums/dd201/jimreed2160/DSCN1261.jpg)
And here is a shot of it loaded and ready for gift duty.
![[Image: DSCN1262.jpg]](http://i224.photobucket.com/albums/dd201/jimreed2160/DSCN1262.jpg)
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Please visit my website
splintermaking.com