02-28-2017, 04:25 PM
(02-15-2017, 12:11 PM)ez-duzit Wrote: Build your table top and then take the whole glue-up to someone with a wide belt sander. If you really must plane it, rip the 14" right down the center and re-join it; you'll never notice the join.
Came here to say the same thing. I've used a local lumber-yard/millwork shop to do the same in the past.. As I recall it wasn't "cheap" - something like a $60/hr for their time on their wide-belt sander but in the end I had a 3' wide by 5' long table-top sanded perfectly flat with what amounted to no effort on my part other than hauling the thing to them and back. was well worth it
