Posts: 85
Threads: 0
Joined: Aug 2005
A year or three ago I saw an article for a shop made jig for the TS fence that could cut tapers safely and also do other things ( which I forget, at 75). The jig consisted of 2 boards in an "L" shape, with one side clamped to the fence and bottom board parallel to the table. I also can't remember how the workpiece is secured. There are many tapering jigs to purchase, but I would rather make my own. Has anyone seen this or made it. The article was from a known woodworker, and maybe in Fine Woodworking.
Thanks for any help, except for the name of a geriatric neurologist. Vic M
Now I always use a splitter. Learned the easy way.
Posts: 304
Threads: 0
Joined: Jul 2007
I see 2 that come up right away. This old one on FW
http://www.finewoodworking.com/2006/10/1...pering-jig and this one in WJ
http://www.woodworkersjournal.com/table-...jig-plans/ . Now I have the older type, but do not like how it holds the work, It scares me. This one from I-Build-it You-Tube looks almost what I think you are looking for
https://ibuildit.ca/projects/table-saw-tapering-jig/. Have Fun. Dan
Posts: 85
Threads: 0
Joined: Aug 2005
Thank you Dan, that is the one.
Now I always use a splitter. Learned the easy way.
Posts: 12,885
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(02-03-2018, 01:43 PM)Vic M Wrote: A year or three ago I saw an article for a shop made jig for the TS fence that could cut tapers safely and also do other things ( which I forget, at 75). The jig consisted of 2 boards in an "L" shape, with one side clamped to the fence and bottom board parallel to the table. I also can't remember how the workpiece is secured. There are many tapering jigs to purchase, but I would rather make my own. Has anyone seen this or made it. The article was from a known woodworker, and maybe in Fine Woodworking.
Thanks for any help, except for the name of a geriatric neurologist. Vic M
Here is a newer one by Steve Latta from FWW Sept. 2012:
Link
John
