Posts: 3,066
Threads: 0
Joined: Jan 2004
I too am amazed at some of the shlocky suggestions. Users of hand tools never think twice on these things: a couple swipes with a hand plane removes the problem snipelessly. Less than a minute, no dust collection or hearing protection, no sanding, etc.
I know you can make stuff using only machines, but really, why would you want to?
Posts: 3,120
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
(02-08-2018, 07:59 PM)TomFromStLouis Wrote: I too am amazed at some of the shlocky suggestions. Users of hand tools never think twice on these things: a couple swipes with a hand plane removes the problem snipelessly. Less than a minute, no dust collection or hearing protection, no sanding, etc.
I know you can make stuff using only machines, but really, why would you want to?
Very true Tom!
Posts: 813
Threads: 0
Joined: May 2007
Location: Jackson, WY
(02-08-2018, 07:59 PM)TomFromStLouis Wrote: I too am amazed at some of the shlocky suggestions. Users of hand tools never think twice on these things: a couple swipes with a hand plane removes the problem snipelessly. Less than a minute, no dust collection or hearing protection, no sanding, etc.
I know you can make stuff using only machines, but really, why would you want to?
I agree on the power of hand tools. I am building my tools for the exact reasons you have stated and look forward to getting there where I have the tools and skills you describe. I feel that hand tools are a lot harder to find, tune and the skills required to use them are just as elusive. The reason hand tool workers can be even more proud of the work they create.
On the other side of the equation, if the OP never broke out his block plane to soften the edges, he would not have had this problem in the first place.
A carpenter's house is never done.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
