|
Replacement filter for my Griz 1029
|
02-15-2018, 12:38 AM
Need to replace the Jet filter on my Grizzly 1029 and wondering what would be a good replacement. I'ts 10 or more years old and wondering what options I would have. Starting to see dust in the air and on everything. Thanks for any advice
02-15-2018, 01:25 AM
(02-15-2018, 12:38 AM)gramps408 Wrote: Need to replace the Jet filter on my Grizzly 1029 and wondering what would be a good replacement. I'ts 10 or more years old and wondering what options I would have. Starting to see dust in the air and on everything. Thanks for any adviceNot sure what model my Griz is but looks like the G1029. I built it into a custom collector with a cyclone separator. I used a Wynn Environmental filter. A canister will get you a dust collection close to HEPA filter filtration with 2 times the air flow through of a 2 bag set of filters. I think this filter should fit your needs but if you want to call Wynn and ask for technical support you will talk to Mr Wynn himself. https://wynnenv.com/woodworking-filters/...2-filters/
A carpenter's house is never done.
Along with replacing the filter, do you plan to upgrade your G1029 by adding a Thien baffle? A Super Dust Deputy?
http://www.jpthien.com/smf/index.php?topic=71.0 https://www.woodcraft.com/products/oneid...gJj5vD_BwE The Wynn 35A and 35B filters are the same size and both will fit your G1029. https://wynnenv.com/woodworking-filters/cost-overview/
02-15-2018, 12:07 PM
(02-15-2018, 03:01 AM)Lynden Wrote: Along with replacing the filter, do you plan to upgrade your G1029 by adding a Thien baffle? A Super Dust Deputy? That's what I am doing now.
A carpenter's house is never done.
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
