03-20-2018, 11:12 AM
The wood shop where I am volunteering has a Delta SA350 Oscillating Spindle Sander. Runs smooth and all the parts are present.
The dust collection chute is broken and parts are available from ereplacementparts.com
I can't find any directions on taking this unit apart for repair. It may be straight forward but before I wander off in the wrong direction I thought I would ask if anyone has done this repair and can offer any advise.
Thanks,
Bill
The dust collection chute is broken and parts are available from ereplacementparts.com
I can't find any directions on taking this unit apart for repair. It may be straight forward but before I wander off in the wrong direction I thought I would ask if anyone has done this repair and can offer any advise.
Thanks,
Bill