|
Purple Heart
|
04-02-2018, 11:17 AM
What finish do you recommend for purple heart. It will see minimal UV rays, currently is fairly purple after cutting and sanding, it's been about 5 days.
I was thinking UV protection type of water based poly. 
Bill Wilson
This is Your Life...and we bet it will be a really good one because he works hard and really, really
04-02-2018, 01:43 PM
That's probably about as good of a choice as any. Avoid anything oil based. It will turn the purpleheart brown.
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
04-02-2018, 02:42 PM
(04-02-2018, 11:17 AM)JKimel Wrote: What finish do you recommend for purple heart. It will see minimal UV rays, currently is fairly purple after cutting and sanding, it's been about 5 days. Here are the WB clear coats I know of with good UV packages: Sherwin Williams Kem Aqua Plus General Finishes High Performance Poly Target Coatings EM-9300 All can be sprayed but only the HP Poly is brushable. John
04-03-2018, 11:21 AM
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
