07-14-2018, 08:45 AM
(This post was last modified: 07-20-2018, 06:53 AM by 5thumbs.
Edit Reason: SPLD!
)
Lightly used Delta mini-lathe with:
• Powerful 1 HP max, 1,725 RPM Motor
• Large 12 1/2 in. swing capacity provides the largest capacity in its class
• Electronic Variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position
• Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Sanding a turned piece against the grain will cut the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve this super smooth finish.
• Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life.
• 6 groove belt provides superior power to turn large objects
• Cast-iron construction provides stability and is extremely durable
• Over Headstock On/Off switch provides easy in use access
• Ball-bearing live center
• Includes 3 in. face plate, 6 in. tool rest and 10 in. tool rest. Turning long spindles require either a longer tool rest or the user to continually move the short tool rest. Turning short work requires a short spindle; the long spindle will not allow the turner to get close enough to the piece.
• On board storage for easy access to adjustment tools
• Heavy-duty, steel knockout bar
Also includes a stand, inside & outside calipers, useful to duplicating turnings such as spindles, a handy bowl sander for inside curved surfaces, and multiple blanks of white oak, walnut, and a box elder burl.
I hav e pics I can send - they are too large for this forum & I don't have software on this computer to resize them.
Price is $700 for all' located in Newark, DE.
• Powerful 1 HP max, 1,725 RPM Motor
• Large 12 1/2 in. swing capacity provides the largest capacity in its class
• Electronic Variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position
• Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Sanding a turned piece against the grain will cut the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve this super smooth finish.
• Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life.
• 6 groove belt provides superior power to turn large objects
• Cast-iron construction provides stability and is extremely durable
• Over Headstock On/Off switch provides easy in use access
• Ball-bearing live center
• Includes 3 in. face plate, 6 in. tool rest and 10 in. tool rest. Turning long spindles require either a longer tool rest or the user to continually move the short tool rest. Turning short work requires a short spindle; the long spindle will not allow the turner to get close enough to the piece.
• On board storage for easy access to adjustment tools
• Heavy-duty, steel knockout bar
Also includes a stand, inside & outside calipers, useful to duplicating turnings such as spindles, a handy bowl sander for inside curved surfaces, and multiple blanks of white oak, walnut, and a box elder burl.
I hav e pics I can send - they are too large for this forum & I don't have software on this computer to resize them.
Price is $700 for all' located in Newark, DE.
Jim
Demonstrating every day that enthusiasm cannot overcome a lack of talent!
Demonstrating every day that enthusiasm cannot overcome a lack of talent!
