09-21-2018, 07:12 AM
Notice that outside end of clutter head can be deflected .001 inch. Is this normal or do I have a problem? If a problem, how to fix? Thanks..Bill in SD
|
Dj20 with ? Issue
|
09-21-2018, 09:07 AM
Take the belt off and check both sides. If they are both the same I'd say you have no problem as long as the bearings aren't talking.
John
09-23-2018, 10:03 PM
(This post was last modified: 09-23-2018, 10:04 PM by BloomingtonMike.)
This is 1/5 of the thickness of a piece of paper. I doubt your knife height is even set that accurately on a DJ20.
Glad its my shop I am responsible for - I only have to make me happy. 
09-24-2018, 05:07 PM
Yeah I'd tend to think you're ok. A relatively fine shaving with my hand plane and measured .005" thick. For perspective it would take 200 perfect passes at .005" to remove one inch of wood
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes ![[Image: 07-15-28-122_512.gif]](https://cdn.pixabay.com/animation/2023/02/03/07/15/07-15-28-122_512.gif)
|
|
|
Users browsing this thread: 1 Guest(s)