Posts: 36,542
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(03-27-2019, 05:33 PM)Snipe Hunter Wrote: 5/4 pressure treated decking
this. thicker than ply so takes more damage and less likely to warp. It has gaps for drainage, and you can screw hardware to it.
easier to transport and handle and process into the dimensions you need
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
(03-28-2019, 11:12 AM)goaliedad Wrote: MDO plywood. Menards sells it here. Give it a good coat of paint. Or 5/4 deck boards.
Unfortunately most of the US isn't fortunate enough to have a Menards yet.... I was in Mentor,oh last week and they are finally almost done with their new Menards right next to Home Depot or soon to be former home depot.... Course that region has a serious lack of home improvement stores so depot might last a few days... I wish they were open as I am always doing projects while there.
As for material I'll also go with the 5/4 decking. Cheap strong etc... Treat it with a good coat of used motor oil and it'll be good to go. Wood trailer decks are treated with used motor oil as it works better than anything you can buy.
Posts: 36,542
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(03-28-2019, 07:42 PM)Robert Adams Wrote: Wood trailer decks are treated with used motor oil as it works better than anything you can buy.
Interesting. I need to replace the plywood deck on my little trailer. Im thinking of sleepers bolted to the frame and then screwing decking down to the sleepers. I will have to remember the motor oil treatment.
Posts: 14,931
Threads: 0
Joined: Sep 2004
Location: Butler, PA
(03-28-2019, 07:42 PM)Robert Adams Wrote: ... Treat it with a good coat of used motor oil and it'll be good to go. Wood trailer decks are treated with used motor oil as it works better than anything you can buy.
Should one wait until the treated lumber dries out a bit before oiling? Ever have any trouble with oil getting on stuff loaded in the trailer/cart?
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 10,774
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
I've done the used motor oil treatment to both my flatbed trailers.
Pick a hot sunny day, park it in full sun and put a generous coat on.
Ed
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
And find a spot where the dripping won't kill the grass.
Yes, wait a few months till the treated lumber dries out.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 2,840
Threads: 0
Joined: Nov 2006
Location: Western NY
I had some scrap T1-11 siding I used to rebuild mine. It is good enough for a cart. If I get 5 years, I am happy. I will just find some more scrap something then too.
I tried not believing. That did not work, so now I just believe
Posts: 1,998
Threads: 1
Joined: Aug 2016
If you were wanting pvc like in your original post, try composite decking. Should work unless you are dropping boulders on it in cold weather. Roly
Posts: 917
Threads: 0
Joined: Sep 2008
I received a rubbermaid garden cart about 20 years ago as a gift. Used and abused it hard. Just as good as the day I bought it. I was concerned about the plastic box, but would highly recomend them if you can find one used or new. Have never had to do anything to it. Just another option.
Posts: 64,666
Threads: 3
Joined: Feb 2007
Location: Merryland
I put a pressure treated deck and sides and on my utility trailer about 16 years ago. I've never treated them and it sits outside. From the looks, they'll go another 16 years. The deck is 2x8s and the sides are the 1" (5/4 nom) decking boards.