07-16-2019, 11:59 AM
I'm building a Bonsai display table that will be kept outdoors.
I'm planning to put on a coat of System three epoxy followed by a 2 or 3 coats of their varnish.
The top is 15 inches wide and about 5 feet long.
Is the epoxy a good idea or should I just use the varnish?
Thank you,
Mike
I'm planning to put on a coat of System three epoxy followed by a 2 or 3 coats of their varnish.
The top is 15 inches wide and about 5 feet long.
Is the epoxy a good idea or should I just use the varnish?
Thank you,
Mike