Posts: 1,343
Threads: 0
Joined: Oct 2005
Location: Daytona Beach, Fl.
I have the Whiteside inlay kit and a Bosch 1617 plunge router. The router plate opening is too big for the inlay kit. Does anyone know what adapter I need to make them comparable"? Bosch on line not much help. Thanks.
Posts: 38,525
Threads: 0
Joined: Feb 2002
Location: East Texas
Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick
Mark
Posts: 794
Threads: 0
Joined: Nov 2006
Location: Halstead, ks
In addition to the RA1129 that meackerman referenced you may also need this RA1100 which accepts Porter Cable style guide bushings.
https://www.amazon.com/Bosch-RA1100-Thre...WA9ZB195AY
Bill
Posts: 1,491
Threads: 0
Joined: Apr 2003
Location: Farmington, MN
I use the RA1129 to hold the RA1129 and then use the Porter Cable guide bushings. I tried a set of Rockler Brass bushings but found them to be sloppy and enough out of round that they did not work well in a Leigh Dovetail jig. No issues with the Porter Cable bushings.
Dave
MKM - Master Kindling Maker
Posts: 771
Threads: 0
Joined: Jan 2007
Location: ATL
(12-26-2019, 02:17 PM)wjt Wrote: In addition to the RA1129 that meackerman referenced you may also need this RA1100 which accepts Porter Cable style guide bushings.
https://www.amazon.com/Bosch-RA1100-Thre...WA9ZB195AY
Bill, et al the RA1100
is included with RA1129 .
You may notice it says "set", and is shown in the picture.