Start off with the Lumber.
Lumber for sale, most rough sawn.
.
Various species
Mahogany: $5 a board foot, approx 215 board feet available. Boards range from 1" to 4" thick and widths from 5 to 19” and lengths to 12’. Average board is 12 board feet. One board is gorgeous at 19” wide, 131” long, and 6 quarter thick. $1000
Oak: $4 a board foot, approx. 120 board feet. Boards range from 1.25 to 2” thick (only 2 are 1.25 thick, rest are 2”, 5-11” wide and 7 to 14’ long. Not sure if red or white oak, probably some of each. Average board is 11 board feet. $500
Pine $3 a board foot, approx. 150 board feet. Boards range from 1-2” thick (1 at 1”), 6 to 11” wide, and 8 – 16’ long. Average board is 12 board feet. $450
Maple $3 per board foot, approx. 75 board feet. Most boards are 1” thick (one is 2” thick), 6-10.5 wide, and 8 to 12’ long. Average board is 7 board feet. $225
Prices are based on the entire species lot.
Boards are solid, clean, and mostly rough sawn, these were stock from my father, a signmaker who retired. Located in Sandwich MA. Local pickup only.
Also available
Delta DJ 15 Jointer 6” in good shape $500
Jet Table Saw with sliding table, includes 30" fence, mobile base, miter gauge, and blades. Runs on either 240 or 120, but currently wired for 120. $500 <SOLD>
Assembly Cart $100
Horizontal belt sander (shop made) takes 4x24 belts $100
Ridgid 4330 13" thickness planer. With extra set of blades and a wooden stand. $200
Central Machinery Dust collector $75
All machinery in Sandwich MA 02563, except the Ridgid Planer, which is in Wrentham MA 02093 Local pickup only.
PM or email xskibum - a.t.- hotmail d.o.t. com
Lumber for sale, most rough sawn.
.
Various species
Mahogany: $5 a board foot, approx 215 board feet available. Boards range from 1" to 4" thick and widths from 5 to 19” and lengths to 12’. Average board is 12 board feet. One board is gorgeous at 19” wide, 131” long, and 6 quarter thick. $1000
Oak: $4 a board foot, approx. 120 board feet. Boards range from 1.25 to 2” thick (only 2 are 1.25 thick, rest are 2”, 5-11” wide and 7 to 14’ long. Not sure if red or white oak, probably some of each. Average board is 11 board feet. $500
Pine $3 a board foot, approx. 150 board feet. Boards range from 1-2” thick (1 at 1”), 6 to 11” wide, and 8 – 16’ long. Average board is 12 board feet. $450
Maple $3 per board foot, approx. 75 board feet. Most boards are 1” thick (one is 2” thick), 6-10.5 wide, and 8 to 12’ long. Average board is 7 board feet. $225
Prices are based on the entire species lot.
Boards are solid, clean, and mostly rough sawn, these were stock from my father, a signmaker who retired. Located in Sandwich MA. Local pickup only.
Also available
Delta DJ 15 Jointer 6” in good shape $500
Jet Table Saw with sliding table, includes 30" fence, mobile base, miter gauge, and blades. Runs on either 240 or 120, but currently wired for 120. $500 <SOLD>
Assembly Cart $100
Horizontal belt sander (shop made) takes 4x24 belts $100
Ridgid 4330 13" thickness planer. With extra set of blades and a wooden stand. $200
Central Machinery Dust collector $75
All machinery in Sandwich MA 02563, except the Ridgid Planer, which is in Wrentham MA 02093 Local pickup only.
PM or email xskibum - a.t.- hotmail d.o.t. com