10-21-2020, 12:39 PM
(This post was last modified: 10-21-2020, 04:10 PM by jamesglenn.
Edit Reason: payment method
)
[attachment=30436]#1) Carter Guide piece is the CTR-1 - $65.00 shipped
Never used.
CTR1 -For use on saws equipped with Carter guide kits. Fits in 7/16" mounts.
The unique patented Stabilizer® from Carter is very different from any traditional guide in that it is not designed to hold the blade with immovable support on three sides. Instead, its grooved bearing wheel firmly prevents the blade from moving backwards or shifting left or right while still permitting the front of the blade to twist slightly side to side. This allows the user to make tight radius complex curves that no traditional guide system can achieve.
With traditional guides and Carter Conversion kits you can still cut curves, but are limited by the width of your blade as to the radius of the curve. With the Stabilizer®, the blade can twist and turn so you are no longer limited by the blade width as to the radius of your curves.
Essentially the two guide types serve two distinct purposes: the Stabilizer® allows you to make elaborate scroll saw type cuts with your bandsaw; and our Carter roller bearing conversion kits provide the complete three side support that allows you to cut perfectly straight resaw/rip cuts and traditional radius curves better then any other guide system on the market.
#2) Bandsaw blades - $45.00 shipped for both
First is a 105" Lenox Diemaster 2 Blade (3 or 4 tpi) I forgot what I counted last night; 1/2" wide; .025ga
Second is a 105" Olsen All Pro Blade 3 tpi; 1/2" wide; .025ga
Neither blades has been used.
Shipping is USPS flat rate only to the continental 48 states, anything overseas or outside of these would need to be discussed.
Payment thru Paypal F&F, or you include the fee please.
Local pickup around Albany, NY is possible
Never used.
CTR1 -For use on saws equipped with Carter guide kits. Fits in 7/16" mounts.
The unique patented Stabilizer® from Carter is very different from any traditional guide in that it is not designed to hold the blade with immovable support on three sides. Instead, its grooved bearing wheel firmly prevents the blade from moving backwards or shifting left or right while still permitting the front of the blade to twist slightly side to side. This allows the user to make tight radius complex curves that no traditional guide system can achieve.
With traditional guides and Carter Conversion kits you can still cut curves, but are limited by the width of your blade as to the radius of the curve. With the Stabilizer®, the blade can twist and turn so you are no longer limited by the blade width as to the radius of your curves.
Essentially the two guide types serve two distinct purposes: the Stabilizer® allows you to make elaborate scroll saw type cuts with your bandsaw; and our Carter roller bearing conversion kits provide the complete three side support that allows you to cut perfectly straight resaw/rip cuts and traditional radius curves better then any other guide system on the market.
#2) Bandsaw blades - $45.00 shipped for both
First is a 105" Lenox Diemaster 2 Blade (3 or 4 tpi) I forgot what I counted last night; 1/2" wide; .025ga
Second is a 105" Olsen All Pro Blade 3 tpi; 1/2" wide; .025ga
Neither blades has been used.
Shipping is USPS flat rate only to the continental 48 states, anything overseas or outside of these would need to be discussed.
Payment thru Paypal F&F, or you include the fee please.
Local pickup around Albany, NY is possible
![[Image: 07-15-28-122_512.gif]](https://cdn.pixabay.com/animation/2023/02/03/07/15/07-15-28-122_512.gif)