12-14-2020, 10:16 PM
If you use welded or bent metal railing you wouldn't need an extra post, just a dog leg as already suggested. It probably could be done with a well designed wooden railing, too.
John
John
Deck railing conundrum
|
12-14-2020, 10:16 PM
If you use welded or bent metal railing you wouldn't need an extra post, just a dog leg as already suggested. It probably could be done with a well designed wooden railing, too.
John
12-15-2020, 09:11 AM
(12-14-2020, 03:05 PM)barnowl Wrote: Edit to add: That is NOT what you drew. What you drew is only a set of stairs. No deck. I thought it was obvious that the deck was behind the stairs. (Who builds a set of stairs and calls it a deck???)))
Dumber than I appear
12-15-2020, 07:37 PM
Does your design meet code?
The gap between the rails must be more than 4” and the height must exceed 36”.
Gary
Please don’t quote the trolls. Liberty, Freedom and Individual Responsibility Say what you'll do and do what you say.
12-15-2020, 10:57 PM
#1, raise the lower rail up some, or just add a post like #3.
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020
12-16-2020, 06:03 AM
(This post was last modified: 12-16-2020, 06:11 AM by Snipe Hunter.)
(12-15-2020, 07:37 PM)Gary G™ Wrote: Does your design meet code? The gap between the between balusters must be no more than 4” and the gap between the lower stair rail and the stair treads and risers must be no more than 6" and the top rail height must exceed 36”. This isn't really quite true though. The code states that a 4" ball cannot pass between balusters, rails or decking components. So a 4" gap is allowed but a 4" ball cannot pass through. The distance from where a riser intersects with a tread and the lower rail can be more than 6".
12-17-2020, 08:08 PM
What I meant to say is the 4” code typically comes into play if the height meets or exceed 36”
Not sure how I wrote what I originally posted. The main point being: DP, you need to consider safety as you reconsider the design for this project.
Gary
Please don’t quote the trolls. Liberty, Freedom and Individual Responsibility Say what you'll do and do what you say.
It is the bottom rail that is problematic. Eliminate it.
Add decorative balusters. Easier to meet the 4” requirement edit: nix on the decorative, go with straight chamfered 2x2 or similar so the long balusters on that 18” of deck looks like they belong. |
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.