WTB: Motor for Delta DP220

[msweig]

<p>I've got an old Delta DP220 where the motor is shot and I need to replace it.&nbsp; I'm looking for a 1/3 or 1/2 HP, 1725rpm, 1/2" D-shaft, Single phase/115V.&nbsp; Bolt mounting holes need to be 5 1/4" apart perpendicular to the shaft. For the length of the shaft my current motor is 4", but I've got some flexibility on that number as the mounting plate on the DP220 is slotted. I'd like the box on the side so I can attach the rod to the switch.<!--EndFragment-->

</p><p><br></p><p>I've also posted this in OWWM, but figured I would also post here in case someone had one sitting around but doesn't go over there.</p><p><br></p><p>Mark<br></p>