Posts: 3,057
Threads: 0
Joined: Dec 2006
Location: Concord, NC
(11-27-2021, 01:24 PM)Gary G™ Wrote: I would go taller than 8’ on the low side.
Mine is 11’ which gives me room for transom Windows around the perimeter.
During the day, I can work with natural light and the lights are high enough to be out of the way of sheet goods and most boards I work with.
I am ashamed to say I had to look "
transom" up.
"Life is too short for bad tools.".-- Pedder 7/22/11
Posts: 21,881
Threads: 0
Joined: Oct 2003
(11-28-2021, 12:09 PM)Scott W Wrote: I am ashamed to say I had to look “transom" up.
Why?
None of us knows everything.
You’re going to learn a lot building your shop and get great satisfaction from the work and your WW’ing to come.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
If you go with the transom windows, an idea that I really like, orient the building such that you maximize the sunlight.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
