Posts: 162
Threads: 1
Joined: Sep 2017
Has anyone built the Craftsman bed No. 235. Is this for a queen size mattress? 85.5" l x 67.75"W x 57"H
Need a full size mattress version or how to scale the width.
![[Image: bed.jpg]](https://i.ibb.co/hcqGH42/bed.jpg)
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
(01-01-2022, 10:16 PM)Woodworm! Wrote: Has anyone built the Craftsman bed No. 235. Is this for a queen size mattress? 85.5" l x 67.75"W x 57"H
Need a full size mattress version or how to scale the width.
That probably is for a queen (standard mattress 60 x 80). Not sure you can 'scale' it. You'll need to change the dimensions between the rails to fit the full size and go from there. I would measure the actual box spring you're going to use.
Posts: 212
Threads: 0
Joined: Jan 2018
Have the box springs on hand before building. If building a bed for a customer, make them sign off on dimensions if they don't have the box springs on hand. DAMHIKT.
Posts: 524
Threads: 0
Joined: Apr 2007
I’m just finishing this build. The only thing I have left is to cut the slats and install the rail hardware. Yes, the plans are for a queen size bed. You’ll need the reduce the headboard/footboard width by 6” and make the rails 5” shorter to fit a full size. You need to verify the dimensions.
