Posts: 2,274
Threads: 90
Joined: Jun 2001
I have a SS cabinet saw and would like to use my craftsman molding head. I do have the dado module but the molding head is smaller. I have not tried using the bypass at all. Will the bypass allow the saw to work?
TIA. I haven't had the SS a year yet so I am still learning.
John
Always use the right tool for the job.
We need to clean house.
Posts: 70
Threads: 0
Joined: Feb 2017
02-14-2022, 12:09 AM
(This post was last modified: 02-14-2022, 12:12 AM by jeffss.)
(02-13-2022, 08:53 PM)John Mihich Wrote: I have a SS cabinet saw and would like to use my craftsman molding head. I do have the dado module but the molding head is smaller. I have not tried using the bypass at all. Will the bypass allow the saw to work?
TIA. I haven't had the SS a year yet so I am still learning.
My guess is you will get the error code "adjust position of brake cartridge". The bypass option is only available after the saw does a self check. You won't even be able to try the bypass.
Posts: 12,605
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Nope, it won't work......
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,407
Threads: 2
Joined: Jun 2003
Yup, no can do.
I read somewhere about a hack using tin foil to fool the cartridge.
I don't recommend it!
Posts: 2,274
Threads: 90
Joined: Jun 2001
Thanks guys. I guess I will be putting the head up for sale. Did use it a lot but did like it.
John
Always use the right tool for the job.
We need to clean house.
