Posts: 708
Threads: 37
Joined: May 2000
Location: Southeast, Florida
Hello All,
I have been cutting more bevels on my Unisaw lately. I have a Biesmeyer splitter that has the anti kickback pals too. I can't use it when I cut bevels as it does not move with the blade. Does anyone have a recommendation for a splitter that moves with the blade that I can cut bevels?
Thanks, Bill
Posts: 5,263
Threads: 0
Joined: Jul 2004
Location: Bluegrass of KY
(02-23-2022, 08:37 AM)bpatters69 Wrote: Hello All,
I have been cutting more bevels on my Unisaw lately. I have a Biesmeyer splitter that has the anti kickback pals too. I can't use it when I cut bevels as it does not move with the blade. Does anyone have a recommendation for a splitter that moves with the blade that I can cut bevels?
Thanks, Bill
I think most, if not all splitters are only for 90 degrees. A riving knife would fit the bill but it has to be built in the saw, as far as I know.
1st class birdhouse builder/scrapwood mfg.
Posts: 12,926
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
The stock guard/splitter that came with your saw will work, or at least it does on mine. I never got the guard since the saw was used and had been lost somewhere along the line, but the splitter/guard mount pivots with the arbor. I fabricated a couple of splitters for it. They get attached to that splitter mount and pivot with the arbor, all the way to 45 deg.
John
