Woodnet Forums › › Active › Woodworking Power Tools v
Belt / Disc sander modification
Thread Modes
Belt / Disc sander modification
MT Woodworker Offline
Honored Veteran
Posts: 527
Threads: 0
Joined: Feb 2021
Location: Stevi, Montana
#4
05-05-2022, 02:24 PM (This post was last modified: 05-06-2022, 07:09 AM by MT Woodworker.)
Did a little modification to my Grizzly combo Belt / Disc sander. Was not happy with the dust collection.
So I added a small shield for the disc sander.
Then a dust chute/shield for the belt side. Comes off when a belt needs changing.

Greatly enhanced the dust collection.

I rarely if ever move the table off 90 degrees to the platen, so no issues.

[attachment=42118]

[attachment=42119]
Find
Reply
Cian Offline
Maxed out Honored Member
Posts: 30,415
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
#5
05-12-2022, 08:31 AM
Good modification
The Neanderthal Index and The Power Index
Website Find
Reply
stav Offline
Member
Posts: 9,536
Threads: 0
Joined: Jan 2005
Location: Orlando FL
#6
05-13-2022, 08:35 AM
Not to diminish your efforts, but it all looks pretty straight forward.  You have to wonder why the manufacturer wouldn't add those things (aside from the obvious of cost savings on their part).
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.