Posts: 2,389
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
I asked this in Finishing, but there isn't a lot of traffic there.
...is my go-to for finishing on turnings, mostly bowls. I use paper towels to apply the finish. As you might guess, even with three coats, a can last a long time.
Problem: the once thin liquid begins to thicken. I have added paint thinner several times, with little change seen.
Question: once it begins to "jell", should I just give up and buy a new can?
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 27,958
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
It’s what I’ve used for years on hundreds of bowls. Once it thickens, it’s done. I’ve tried all kinds of ways to “save” it and none worked well.
VH07V
Posts: 14,860
Threads: 10
Joined: Jan 2010
Location: southeastern VA
I cannot comment on the MINWAX.
I can say that I used Deft as a wipe-on on my first successful hollow-form (done in a private class). The wood was very highly figured maple and pretty dry. The wood really sucked up the Deft and darkened so much that much of the figure was no longer visible without a close look.
That sort of discouraged me from using wipe-on poly after that.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 9
Threads: 0
Joined: Jan 2022
You might try some of these STOPLOSS BAGS
https://www.stoplossbags.com
I have not tried them but others who have speak well about their ability to preserve wood finish products.
calabrese55
Let your hands tell the story of the passion in your heart!
Posts: 4,787
Threads: 0
Joined: Jan 2005
Deft is a lacquer and definitely amber in color. Oil based poly is amber as well but to a lesser degree, and water based is almost completely clear.
I have had very good results storing waterlox in the stop loss bags. At $30 a quart you have to protect that stuff!
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
(11-03-2022, 09:31 AM)Dusty Workshop Wrote: Deft is a lacquer and definitely amber in color. Oil based poly is amber as well but to a lesser degree, and water based is almost completely clear.
I have had very good results storing waterlox in the stop loss bags. At $30 a quart you have to protect that stuff!
who dat??
hey there, dusty!
i really like tru-oil . . . that stuff is great, and real easy to apply.
Posts: 4,787
Threads: 0
Joined: Jan 2005
SUP Arthro!?
Sorry we didn't get to meet up in MD.
We are in NC now.
Posts: 116,182
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
(11-04-2022, 10:48 AM)arthropod98 Wrote: who dat??
hey there, dusty!
i really like tru-oil . . . that stuff is great, and real easy to apply.
.........................
Same here........since 1970...50yrs experience using it
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 2,729
Threads: 0
Joined: Dec 2005
I have had good luck with Bloxygen: the odd thing is when you buy a can of this stuff it feels empty..
![[Image: 39562-01-1000.jpg]](https://www.rockler.com/media/catalog/product/cache/5c5edcf249a74e99ece620285918bb9b/3/9/39562-01-1000.jpg)
